Home / News / Industry News / Grade 70 Transport Chains can be used for a wide range of applications
Grade 70 Transport Chains can be used for a wide range of applications
Grade 70 Transport Chains can be used for a wide range of applications. These chains are rated for a working load of nine thousand two hundred pounds and feature grab hooks on each end that are designed for 3/8 inch chain. The standard links are made of zinc passivated drop forged alloy steel and feature rolled edges to extend the life of the straps. In addition, they provide even tension around the load, greatly accelerating loading and unloading times.
Designed for use in the transportation industry, Grade 70 Transport Chains are heat-treated, high-tensile steel that is plated with yellow chromate. They are typically rated at 20% more than standard carbon chains, but are not intended for overhead lifting. The chains are graded by the American Society for Test Materials (ASTM) and the National Association of Chain Manufacturers (NACM). The higher the grade, the more rated the chain is.
Grade 70 Transport Chains are designed for use on over-the-road equipment. They are made of heat-treated carbon steel and are rated for twenty-five percent more work load capacity than standard high-test chains. In addition, these chains are hallmarked every one to three feet with a manufacturer symbol and a grade mark. As you can see, these chains are not suitable for overhead lifting, but they are strong enough to safely handle a car.
Unlike the'standard' carbon chain, Grade 70 is a special type of steel that is specifically designed for transport purposes. Its tensile strength is twenty percent higher than high-test chains. The difference between a high-test and a G70 transport chain is the working load limit. As such, these chains are not designed for overhead lifting. However, they are still suitable for the transportation of goods and other goods.
A Grade 70 Transport Chain is made from quenched and tempered steel. It is designed for overhead lifting and has a higher strength-to-weight ratio than standard carbon chain. This means that Grade 70 Transport Chains are not suitable for lifting over-the-head or overhead applications. It should not be used for heavy-duty overhead lifting. It is available in a wide range of sizes, enabling you to easily choose the right chain for your specific application.
A G70 transport chain is designed specifically for the transportation industry. Its tensile strength is roughly twenty percent higher than a high-test chain. This chain isn't approved for overhead lifting, though it is used for tying down loads. A typical G70 chain has a working load limit of seventy pounds. Despite its weight, a transport chain should not be used for lifting and overhead lifting.
The size of the chain is also an important consideration. If you need to tow a car, you will need a durable chain that is resistant to the elements. The G70 transport chain is designed for this purpose. A tow chain is an integral part of a carrier's securement system. A tow chain is attached to the frame of the recovered car. If the vehicle is overturned, the G70 can't hold it up.
G70 Chain With Clevis Eye Grab Hooks Both Ends
The main purpose of a transport chain is to secure a load to a vehicle or other piece of equipment. The G70 grade is ideal for such purposes. This type of chain is heat-treated and comes with two or three clevis grab hooks to secure the load. This type of chain is popular in North America and Canada. It is not suitable for overhead lifting.